![]() ![]() Confirmation that the number has been changed or has not been changed 13. Copy the visible address of the card: / dev / mcblk0 11./evoplus_cid paste card address paste cid no example. You can see the number c and d 30-32 characters in the line. more and paste the copied line more /sys/devices/./cid example: more /sys/devices/platform/emmc2bus/fe340000.emmc2/mmc_host/mmc0/mmc0:0001/cid 8. Copy the line starting with: /sys/devices/./cid example: /sys/devices/platform/emmc2bus/fe340000.emmc2/mmc_host/mmc0/mmc0:0001/cid 7. We start the terminal and execute the commands, confirming them with the enter key: 1. There are instructions on the Internet on how to do it from a medium other than a microsd card. Have a current eeprom - with proper booting, connect the drive to USB 2.0, not USB 3.0 (in 3.0 it will also go, but there is fun with booting). How to run Raspberrypi from a pendrive or disk - burn the system to this disk using Raspbery pi imager. We turn off RaspberyPi and copy the target files to the card. We start the system and follow all the instructions below. ![]() When we have the option to run the Raspberry from another carrier, insert the card into a dedicated slot and connect the device from which the raspberry is to be started. Method: This is launching the RaspberryPi from a different carrier than the microsd card. Uploading the correct files and using the correct card. Reusing Raspberrypi imager to format the card to the correct format (Fat32). Execution of all commands to change and validate the change of c and d. Of course, it must be a card that allows you to change the number. I tested 2 methods: 1 method: It is uploading to the microsd card that we want to change, the operating system, using the raspberry pi Imager. The following example has been tested and successfully proven on RasbperryPi 4B. You can use any available RaspberryPi anywhere. Instead of looking for adapters on Aliexperes: SD-SATA, SD-PCI_EXPRESS, or an old laptop with such a reader. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |